Price List
This price list has been put together for a loose estimate. With it you can gain a rough idea of what a Freshen-up or a Hop-up may cost by going over the list and adding up what you think you might need.
Every job is customized to fit you performance or budget needs. You may wish to pull the motor in and out of the frame yourself or you may already have cams and need a Valve Job or Tranny work.
After initial discussion the engine gets disassembled for the actual estimate, after seeing what parts are in good shape or the ones that will need to be replaced and then get to the actual estimate.
Other options include picking up the bike at the end of a race weekend and delivering back at the next event (schedule permitting).
Remove and Replace:
Engine removal and installation in Frame; Heat Cycle bike and top off fluids.
| SV | $295.00 |
| 4 Cylinder | $350.00 |
Engine Disassembly and Assembly:
Disassemble Engine down to crankshaft, replace rod and main bearings, inspect clutch and transmission, check cylinder bore, reassemble motor and adjust valves.
| SV | $695.00 |
| 4 Cylinder | $750.00 |
Valve Job:
Cylinder head dissasembly, glass bead valves and inspect and cut seats, replace seals, and reassemble.
| SV | $295.00 |
| 4 Cylinder | $350.00 |
Cylinder Head Upgrades
| Head Milling | |
| SV - Pair | $80.00 |
| 4 Cylinder | $50.00 |
| Superbike Stage 1 Match Intake Manifolds Blend Valve Seat Area | |
| SV | $200.00 |
| 4 Cylinder | $250.00 |
| Superbike Stage 2 | |
| SV | $295.00 |
| 4 Cylinder | $350.00 |
Cylinder Boring
| Cast Iron Sleeves | |
| 1mm | $65.00 per hole |
| 2mm | $75.00 per hole |
Plated Cylinder Bores
| One Piece Cylinder (4 cyl) | $549.00 |
| Cylinder & Case Combo | $695.00 |
Cam Timing Options
| Modify Stock Sprockets | $30.00 |
| Press Adjustable Sprockets on Cams | $40.00 |
| Degree Cams - Check Valve to Piston Clearance | $(+/-) 200.00 |
Common Rebuild Parts List
| Gaskets | $150.00 |
| Crank and Rob Bearings ($50 per cylinder) | |
| SV | $100.00 |
| GSX-R | $200.00 |
| Replace Rings | |
| OEM Rings | $50.00 per cylinder |
| After Market | $30.00 per cylinder |
JE - Weisco - Zlock - Spears
| We use every major manufacturer. | |
| Big Bore Piston Kits | $150.00 per cylinder |
| Carillo H Beam Rods | |
| SV | $540.00 |
| 4 Cyl. | $1080.00 |
| Valve Seals (OEM) | |
| SV | $40.00 |
| 4 Cyl. | $80.00 |
| Camshafts | |
| SV | $500.00 |
| 4 Cyl. | $700.00 |